Winter Bears Clear Stamp Set
Ski Lift Die
Winter Wishes Marci* Rubber Stamp (sentiment only)
Home for Christmas Paper Pack
Hat, scarf: barn door, fired brick
Stamp one of the bears from Winter Bears clear stamp set and colour it up. After colouring fussy cut the image.
Take the piece that covers this part and turn it around. At the back (on the side with cut edges) mark a center and glue there a small folded piece of paper or a bit of a folded ribbon. This will help up open up a box later.
Now we have the front finished and we're going to do the closing part, using magnets. I use small and very thin magnets. One magnet will be placed behind the design paper on the back of the piece we just finished and the other one will be placed on the 2.5" x 4" piece. Make sure to glue down the magnets, so they don't move around.
Once you glue it down you cover it with design paper and glue it to the base. You do the same with the other piece. Make sure the magnets are lined up, so they close one on one. When you have your magnets in place and covered up with design paper you can glue down all the little rectangles.
You can decorate the inside as you please. I added skis and a sentiment.
Add liquid glue to all flaps and close them together. Make sure you don't add glue on the top of the long flaps, because they are left seen.
Now it's time to decorate the front. I cut a piece of 4" wide white cardstock and then cut the top with the Ski Lift Die.