Thursday, October 5, 2017

Tutorial Thursday - Double slider card


Hello !

Céline here with Tutorial Thursday.
Today I will share with you a Double Slider card

But first a little video
Sorry I made this video with my phone and I don't know how to return it ;)
I hope it will works ....


Each measurement is in cm

Cut a piece of cardstock at 29,8 x 13,5
and score at 9,6cm, 19,2cm and 28,9 cm

On the middle panel, measure and mark the middle point between the two score lines. Use the mark as a guide for cutting a half circle with Stitched Nested Circles dies


Cut a piece of soft plastic around 28 x 4 cm
Wrap the piece of plastic all the way around the first panel of your card and secure it with some double sided tape. It should be loose enough to slip around the cardstock with ease.
For the tags
Cut two pieces of cardstock at 13,5 x 9,2 Add a tag pull at the top of your first tag - I used Stitched elements.
and decorate them as desired. 

Close the panel that has the plastic strip around it
and place a piece of double sided tape at the top of the plastic strip.

You will glue your tag with hidden face so flip it over.
Press the tag onto the plastic making sure the edges of the tag are parallel with your card. 

Open the card
Add a piece of double sided tape at the bottom of the plastic strip
You will glue your tag face up
Press the tag onto the plastic making sure the edges of the tag are parallel with your card. 

Now, to close the card :
Add a piece of double side tape on the tab and glue it inside of the card but make sure that you don't accidentally adhere the tag too!

Decorate the front and the back




I've used :
Stamp : Winter Critters

Copic used : 
Bear : E44, 43, 42, 41, 47, BG57, 45, 53
Panda : G29, 28,17, YG25, 13, 03
Rabbit : C3, 2, 1, 0, R56, 46, 29, 27, 24, R85, 83, 81


That's all for me today, hope you like my tutorial.
If you have any question i would be happy to help.
Hugs
Céline

1 comment: